6X Matt Black Paint Tin 180ml

Matt Black Paint Board School Chalk Wood metal concrete 151 Coatings 180ml

Hard Drying, High build, High Performance Tough, Durable and non Yellowing

RED Gloss provides a high sheen finish for interior and exterior wood and metal including skirting boards, doors and Pillar box (letterbox).

This paint is extremely durable and flexible when dry. It will not chip or flake like some other paints. It can be used in the toughest of environments.

The paint is very opaque and has great adhesion to wood, metal, stone, concrete and asphalt. 1 coat should be enough for most situations.

This paint is suitable for both external and internal use.

• Hard Gloss
• High Build
• High Performance
• Touch Up size
• Pillar Box Red gloss paint that is tough and durable can be used on most surfaces
• Ideal for use on craft and decorating work to wood metal and concrete surfaces
• Tough bright and fade resistant
• Can be used internally and externally
• Drying Time 8 to 10 hours
• Re-coatable in 24hrs

Directions: All surfaces should be clean and dry and free of dust, rust, oil and old loose paint. Where loose material is present, sand down with special sanding block or paper. Metal surfaces should be scraped, sanded and primed with an anti-corrosive paint. Using a clean soft brush simply apply a single coat to the surface to be painted.

Drying Time: Allow 8-10 hours for surface drying and 24 hours in normal conditions for paint to hard dry. If applying a second coat wait 24 hours.

Cleaning: Always clean brushes immediately after use with White Spirit or an all purpose Brush Cleaner.

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.