6X Hycote Adhesion Promoter Spray Paint 400ml

Hycote Adhesion Promoter Spray Paint Virtually Invisible Fast Drying 400ml

Do not use on flexible plastics, thermoplastics such as acrylics, polystyrene, polycarbonates and polyolefins etc.

Eliminates the need for specialized pre-treatments.

Promotes optimum adhesion to problematical substrates.

Improves paint adhesion for the best results. Ideal for use with acrylic topcoats.

• An ideal addition for use on difficult substrates: plastics, aluminium, galvanised metals and melamine 
• Use on your project prior to priming 
• A clear satin finish 
• Suitable for use on most surfaces.

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.