5X Upol Power Can Etch Primer Spray 500ml

U-Pol Etch Primer Spray Grey Power Can Direct to metal Anti-Corrosive 500ml

Ideal for priming bare metal surfaces to promote adhesion of paint and prevent the metal surface from rusting

• Ideal for priming bare metal surfaces
• Promotes adhesion of paint and prevents steel surfaces from rusting
• Typically applied to rub-through areas prior to painting, on bare metal substrates and over bare seams before application of sealant
• Can be applied to bare steel, aluminum, galvanized and zinc-coated steels, fully cured paint, polyester body fillers, and G.R.P.
• U-Pol Power Can Professional Spray Paint Aerosol 500ml Etch Primer featuring a specialised large fan pattern, high output, high opacity and no overspray nozzle.
• Powercan Etch Primer is a 1K etch primer in ready to use aerosol form. It is used for priming bare metal surfaces to promote adhesion of paint and prevent the steel surface from rusting.
• Powercan Etch Primer is chromate free. It is typically applied to promote adhesion on rub-through areas prior to painting, on bare metal substrates and over bare seams before application of sealant.

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.