5X Dark Oak Varnish 180ml

Dark Oak Varnish Paint Interior Exterior 151 Coatings Gloss Wooden 180ml

Hard Drying, High build, High Performance Tough, Durable and non Yellowing

Protects all interior wood with a beautiful fade resistant finish.

It delivers superior protection against heat, scratches and water.

This is a resin-based varnish that is used as a protective and decorative wood stain and can be used an all types of interior and exterior wooden surfaces.

Dark Oak varnish is a resin-based varnish that is used as a protective and decorative wood stain.

Can be used on bare, previously stained or varnished wood.

Provides a hard-wearing shield against the elements.

Resists cracking and peeling.

Weatherproof and UV resistant.

It can be used on all types of interior and exterior wooden surfaces: Doors, window frames, architectural timber, conservatories, cladding and garden furniture.

• Top Coat Paint
• Tough And Durable
• Hard drying, high build, high performance.
• Use for inside and outside Surfaces Such as wood, metal and concrete
• Tough and durable for outside
• Easy to use
• Quick results
• Professional finish

Directions: All surfaces should be clean and dry and free of dust, rust, oil and old loose paint. Where loose material is present, sand down with special sanding block or paper. Metal surfaces should be scraped, sanded and primed with an anti-corrosive paint. Using a clean soft brush simply apply a single coat to the surface to be painted.

Drying Time: Allow 8-10 hours for surface drying and 24 hours in normal conditions for paint to hard dry. If applying a second coat wait 24 hours.

Cleaning: Always clean brushes immediately after use with White Spirit or an all purpose Brush Cleaner.

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.