4X Hycote Etch Primer Spray 400ml

Hycote Etch Primer Spray Paint Tough Durable Adhesion Fast Drying 400ml

For use on non-ferrous metals including galvanised, anodised and zinc coated steel, aluminium.

• Excellent covering power
• Excellent adhesion to most non-ferrous surfaces
• Suitable for use on many rigid plastics including glass reinforced polyester [See Section 6 technical date sheet]
• Suitable for use on fully cured and aged paint finishes
• Do not use on copper or brass.

WHERE TO USE

On non-ferrous metals including galvanised, anodised and zinc coated steel, aluminium.

WHERE NOT TO USE

Not recommended for use on copper or brass.

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.