4X Grey Primer Paint Tin 180ml

Grey Primer Paint Interior Exterior 151 Coatings Gloss Wooden Adherence 180ml

Hard Drying, High build, High Performance Tough, Durable and non Yellowing

This range of paint is of professional high build quality with a tough and durable finish. It is ideal for multi-purpose and often used by tradesmen to get that premium, high performance finish to their work.

The ultimate surface preparation for metal and wood.

High Adherance, High Build, High Performance.

Can be used on all bare metal and wood surfaces, interior and exterior.

Grey primer acts as a preparatory or protective coating that prevents rust formation on the ferrous metal surfaces exposed to humidity and air. Used for gates, railings, and outdoor equipment the primer is applied to the rusty surfaces before applying a topcoat.

This paint is extremely durable and flexible when dry. It will not chip or flake like some other paints. It can be used in the toughest of environments.

The paint is very opaque and has great adhesion to wood, metal, stone, concrete and asphalt. 1 coat should be enough for most situations.

This paint is suitable for both external and internal use.

This paint is also ideal for work setting such as warehouses and factories.

• High Metal Adherance / Fast Sticking
• High Build
• High Performance
• Grey Primer undercoat for use on most surfaces including metal
• Suitable for interior and exterior use
• Provides a smooth protective base for further overcoating
• Drying Time 8 to 10 hours.
• Recoatable in 24hrs
• Clean Brushes with White Spirit

Directions: All surfaces should be clean and dry and free of dust, rust, oil and old loose paint. Where loose material is present, sand down with special sanding block or paper. Metal surfaces should be scraped, sanded and primed with an anti-corrosive paint. Using a clean soft brush simply apply a single coat to the surface to be painted.

Drying Time: Allow 8-10 hours for surface drying and 24 hours in normal conditions for paint to hard dry. If applying a second coat wait 24 hours.

Cleaning: Always clean brushes immediately after use with White Spirit or an all purpose Brush Cleaner.

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.