3X Metallic Silver Paint Tin 180ml

Metallic Silver Paint Gloss Wooden High Lustre High Build 151 Coatings 180ml

Hard Drying, High build, High Performance Tough, Durable and non Yellowing

151 Coatings Metallic Silver 180ml paint is a good performance topcoat to decorate railings, gates etc. It will adhere to metal, wood and concrete and is durable in all weather conditions.

Metallic Silver Paint is a topcoat paint which adheres to both interior and exterior surfaces of materials such as wood and metal leaving a metallic finish.

Paint is extremely durable and prevents metal, iron from corrosion. It will not chip or flake like some other paints. It can be used in the toughest of environments.

The paint is very opaque and has great adhesion to metal, Iron. 1 coat should be enough for most situations.

It is suitable for both external and internal use.

• High Lustre, High Build, High Performance.
• Metallic Silver Paint is a topcoat paint which adheres to both interior and exterior surfaces of materials such as wood and metal leaving a metallic silver finish.
• High Lustre
• High Build
• High Performance
• Metallic Silver high gloss varnish that's tough and durable used on all wood types.
• Can be used internally and externally
• Drying Time 8 to 10 hours
• Recoatable in 24hrs
• Hard Drying, High build, High performance tough, Durable.

Directions: All surfaces should be clean and dry and free of dust, rust, oil and old loose paint. Where loose material is present, sand down with special sanding block or paper. Metal surfaces should be scraped, sanded and primed with an anti-corrosive paint. Using a clean soft brush simply apply a single coat to the surface to be painted.

Drying Time: Allow 8-10 hours for surface drying and 24 hours in normal conditions for paint to hard dry. If applying a second coat wait 24 hours.

Cleaning: Always clean brushes immediately after use with White Spirit or an all purpose Brush Cleaner.

Hard Drying, High build, High Performance Tough, Durable and non Yellowing

Directions: All surfaces should be clean and dry and free of dust, rust, oil and old loose paint. Where loose material is present, sand down with special sanding block or paper. Metal surfaces should be scraped, sanded and primed with an anti-corrosive paint. Using a clean soft brush simply apply a single coat to the surface to be painted.

Drying Time: Allow 8-10 hours for surface drying and 24 hours in normal conditions for paint to hard dry. If applying a second coat wait 24 hours.

Cleaning: Always clean brushes immediately after use with White Spirit or an all purpose Brush Cleaner.

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.