3X Iron Gate Black Gloss Paint Tin 180ml

Iron Gate Black Gloss Paint Tough Durable High Build 151 Coatings 180ml

Hard Drying, High build, High Performance Tough, Durable and non Yellowing

151 Coatings Iron Gate Black 180ml paint is a topcoat paint which adheres to both interior and exterior surfaces of materials such as wood, metal and concrete. It is a durable and long lasting and can withstand all weather conditions.

Paint is extremely durable and prevents metal, iron from corrosion. It will not chip or flake like some other paints. It can be used in the toughest of environments.

The paint is very opaque and has great adhesion to metal, Iron. 1 coat should be enough for most situations.

This paint is also ideal for work setting such as warehouses and factories.

• High Build, High Performance, Tough.
• Iron Gate Black Gloss Paint is a topcoat paint which adheres to both interior and exterior surfaces of materials such as wood and metal leaving a high gloss finish.
• Black gloss paint that's tough and durable used on all wood and metal surfaces.
• Can be used internally and externally
• Drying Time 8 to 10 hours
• Recoatable in 24hrs
• Clean brushes with White Spirit or brush cleaner.
• Topcoat paint for iron/metal gates and railings
• Tough,durable and weather resistant
• Suitable for both interior and exterior usage
• Also adheres to wood and concrete

Directions: All surfaces should be clean and dry and free of dust, rust, oil and old loose paint. Where loose material is present, sand down with special sanding block or paper. Metal surfaces should be scraped, sanded and primed with an anti-corrosive paint. Using a clean soft brush simply apply a single coat to the surface to be painted.

Drying Time: Allow 8-10 hours for surface drying and 24 hours in normal conditions for paint to hard dry. If applying a second coat wait 24 hours.

Cleaning: Always clean brushes immediately after use with White Spirit or an all purpose Brush Cleaner.

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.