6X Hycote Extreme Heat Aluminium Spray Paint 400ml

Hycote Extreme Heat Aluminium Vht Spray Paint High Temperature Resistance 400ml

A premium quality, high-temperature matt finishes with outstanding adhesion to bare ferrous metals, and excellent covering power.

This range is designed primarily for use on components exposed to arduous operating conditions.

This range must be stoved [cured] or processed at temperatures shown below to develop optimum thermal resistance.

For use on automotive and DIY applications, including exhaust systems, manifolds and barbeques, and Industrial uses in chemical plants, refinery protection, stoves, motors, chimneys and flues.

Do not use on surfaces seen or suspected of being unsound, without first ascertaining suitability for use on an inconspicuous area, particularly where any existing coating is present or on areas that are unsuitable for post-application stoving or where curing is not possible under operating conditions.

• Exceptional thermal stability 
• Good mechanical strength 
• Superb adhesion to bare steel 
• Resistant to petrol and oils 
• Excellent exterior durability 
• Self priming

Please note:

Due to printing limitations, the colour may vary from the cap and can colour.

400ml Cans have 100ml paint and 300ml propellant. It will do approx. 1m2 of one coat.

200ml Cans have 50ml paint and 150ml propellent. It will do approx. 0.5m2 of one coat.

The above estimates are based on using a primer first especially on porous surfaces where the paint gets absorbed into the material.

We recommend using a primer then paint followed by clear lacquer for best results. Always try on a small area first before spraying the whole area.